NEC 78K/0 Series User Manual page 27

(3) Connecting I/O board (IE-78K0-NS-P0× × × × ) and emulation board (IE-78K0-NS-P0× × × × and IE-780×××
The IE-78K0-NS-P0× and IE-780×××-NS-EM4 are sold separately.
Figure 3-3. Connecting I/O Board and Emulation Board (IE-780×××
<1> Remove the screws from the sides of the
main unit, and then remove the top cover.
<3> Connect the IE-78K0-NS-P0× to the main
board. Fix the attached spacers to the IE-
78K0-NS-P0× at the four corners of the
board.
Attached
spacer
Fix
<5> When using a probe, connect the probe.
CHAPTER 3 INSTALLATION
Attached
spacer
Fix
IE-78K0-NS-P0×
Refer to (5) for the probe
connection method.
User's Manual U13731EJ3V0UM
×××-NS-EM4)
××× ×××
<2> Remove the second plate from the bottom
by removing the screws.
<4> Connect the IE-780×××-NS-EM4 on the IE-78K0-
NS-P0×, and fasten the screws at the four
corners.
<6> Replace the top cover and fasten the four
screws on the sides.
×××-NS-EM4) ××× ×××
IE-780×××-NS-EM4
IE-78K0-NS-P0×
IE-780×××-NS-EM4
IE-78K0-NS-P0×
27