Initial Setup; Install The Projector - Philips NeoPix 730 User Manual

a
Display all the input sources and allow you
to switch to a different one.
OK
b
Confirm a selection.
c
Open or close the settings menu.
d
Access the home screen.
/
e
Increase or decrease the volume.
f
Start, pause or resume media playback .
/
g
Skip to the previous or next media file.
h
Return to the previous screen.
Navigation buttons (Up, Down, Left, Right)
i
• Navigate items on the screen.
• Press / or / to change the value
for the current setting.
j
Open or close the settings menu.
k
Switch the projector on or to standby mode.

Initial setup

3 Initial setup
Notice
Make sure all devices are disconnected
from their power supplies before
establishing or changing any
connections.

Install the projector

You can install the projector in four different
ways. Follow the guidelines below to correctly
install the projector.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front
1 Place the projector on a flat surface such
as a table in front of the projection surface.
This is the most common way to position
the projector for quick setup and portability.
2 If the projection direction is incorrect,
press on the remote control to open
the settings menu, go to Projector > Install
Mode > Front and press the OK button.
7