HP Metal Jet S100 User Manual page 42

WARNING!
vacuuming powder with the hose). Refer to the Safety Data Sheet of the powder being processed and
meet local regulations.
WARNING!
measures against static charges and keep away from ignition sources.
Feed system (manual)
Always follow the steps of the procedure in the order presented.
Safety warnings
For more safety information, see
DANGER!
at any point exceeding 70°C (158°F).
1. It is very important to keep the working area clean. Check the area and clean up any powder
spillage, then follow the regular cleaning procedure: .
CAUTION:
2. Bring the powder container(s) to the work area, close to the vacuum hose. Position it relative to the
Load station as shown in the following image.
38 Chapter 3 System operation
Wear appropriate personal protective equipment when handling powder (such as when
Explosion hazard. During the process, dust clouds can be generated. Take precautionary
Safety precautions on page 2
Explosion hazard, hot powder. Do not introduce powder into the system with a temperature
Wear personal protective equipment for this operation.