Table of Contents
Advertisement
Installing
4.1
Unpacking
NOTICE
Transport damage impairs the correct function of the geared motor
Never commission faulty or defective devices.
Check the device for completeness and damage. Report any missing parts or damage
immediately.
Remove and dispose of the packaging material and transport equipment in compliance with
regulations.
4.2
General information on installation
Operating under load
Under load, the system can start or reverse in an uncontrolled fashion.
The entire system must be disconnected from the load so that there is no danger during this
work.
NOTICE
Destruction caused by welding
Welding destroys the geared parts and bearings.
Do not weld on the gearbox. The gearbox must not be used as a grounding point for
welding operations.
NOTICE
Overheating caused by solar radiation
Overheating of the gearbox due to exposure to direct sunlight.
Provide suitable protective equipment such as covers or roofs. Prevent heat accumulation.
BA 2039 (2KJ4)
Operating Instructions, 12/2022, A5E50009089A/RS-AJ
WARNING
4
23
Advertisement
Table of Contents
