Factory Reset; Play From Bluetooth Devices - Philips TAB7908 User Manual

BASS
TREBLE
CH VOL (Center)
Top level (Height)
DTS Virtual X
Auto volume (AUVOL)

Factory reset

Reset device to default setting.
•
Turn on the soundbar, press and hold
the and
time for 8 seconds.
» Display shows "RESET" for 5
seconds.
» While system reboots, display
shows "REBOOT".

Play from Bluetooth devices

Through Bluetooth, connect the
soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
can listen to the audio files stored on the
device through your soundbar speakers.
1
(Bluetooth) button on the
Press the
soundbar to switch the soundbar to
Bluetooth mode.
» NO BT is displayed on the display
panel.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7908 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
3
Wait until you hear the voice prompt
from the soundbar.
» If the successfully connected, BT
is displayed on the display panel.
18 EN
0
0
0
03
ON
ON
buttons at the same
4
Select and play audio files or music
on your Bluetooth device.
•
During play, if a call comes in,
music play pauses. Play resumes
when the call ends.
•
If your Bluetooth device supports
AVRCP profile, on the remote
control you can press / to skip
to a track, or press
resume play.
To disconnect and pair a new
Bluetooth device
• Directly press and hold
the soundbar or press and hold the
button on the remote control to
disconnect all devices and enter the
Bluetooth pairing mode.
» The soundbar voice prompt and
the display will show "PAIRING".
• Follow step 2-3 in "Play from
Bluetooth devices" above to pair
your Bluetooth device.
Note
•
In an open space without obstructions.
The maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
Multi-point control
The product support multi-point feature,
and can connect two Bluetooth device at
same time.
•
There is audio prompt when the
second Bluetooth device connect the
soundbar.
to pause/
button on