Netum NT-1228BC - Bluetooth Pairing Manual
Pairing with windows XP or Windows 7/8/10
- Power on the scanner, a few seconds later the blue indicator will keep flashing.
- Enter the 'Control Panel' - 'Devices and Printers' - 'Add a device' – select, 'Bluetooth' to add the device to your computer
- Click 'Next', the scanner will beep to indicate a successful pairing, and the light will turn to solid blue.
Connect Android Device in Basic Mode
- Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue indicator will keep flashing.
- Touch Home | Menu | Settings | Wireless & Networks | Bluetooth settings
- Make sure the device has Bluetooth "On". Scan for devices.
- In the list of found devices, select "Netum Bluetooth". Tap Pair.
- The scanner will connect to the Android device.
- The scanner will beep once after it has connected and is ready to scan barcodes
Pairing with your IOS device
- Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue indicator will keep flashing.
- Click on "Bluetooth" in the left column. Your IOS device will automatically start searching for any Bluetooth Devices in the area.
- Once you have identified the "Netum Bluetooth" on the screen, tap on it and you will automatically be connected. The scanner's LED light will turn to solid blue.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Netum NT-1228BC - Bluetooth Pairing Manual
Need Assistance?
Do you have a question about the Netum NT-1228BC that isn't answered in the manual? Leave your question here.