Through Fault Monitoring Report; Through Fault Monitoring Tool - Hitachi Relion 670 Series Operation Manual

1MRK500127-UUS Rev. M
7.1.5

Through fault monitoring report

Through fault reports can be viewed via the user interface using either the PCM tool or the local HMI.
Additionally, the IED generates through fault reports those can be exported using multiple ways.
7.1.5.1

Through fault monitoring tool

The through fault monitoring report can be viewed using a specific tool known as through fault monitoring
using PCM600 tool. This tool can store last 100 through faults and each through fault details can be
viewed using this tool. The collected data can either be retrieved as a direct file transfer from the IED or
be exported using PCM600 tool.
Starting the through fault monitoring tool
Proceed as follows to start the through fault monitoring tool from the IED level:
1. Right click on the Plant Structure of an IED.
2. Select the Through Fault Monitoring from the context menu as shown in
IEC18000083 V1 EN-US
Figure 40:
The through fault reports are read from the IED and the tool gets started. By default, Fault reports
related to the latest function instances are displayed.
670 series
Operation manual
For more information, see the PCM600 documentation.
IEC18000083-1-en.vsdx
Starting the through fault monitoring tool
© 2017 - 2023 Hitachi Energy. All rights reserved
Section 7
Operating procedures
GUID-7B1BBAA3-7E5C-4F4E-BD90-B5D8A47036CE v1
GUID-5BB942EF-AEF3-4880-8ECC-9CA9A569471A v1
GUID-7BB279C0-D436-417D-ACBE-C0CBA55C0DD6 v1
Figure 40.
61