Selecting Operation Mode - D-Link DIR-615 User Manual
Wireless n300 router
Hide thumbs
Also See for DIR-615:
- User manual (208 pages) ,
- Quick installation manual (44 pages) ,
- Training manual (37 pages)
Table of Contents
Advertisement
DIR-615 Wireless N300 Router
Configuring via Web-based Interface
User Manual
Selecting Operation Mode
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The Router mode.
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work mode list select the
WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network, configure LAN ports
to connect an STB or VoIP phone, and set your own password for access to the web-based interface
of the device.
Figure 26. Selecting an operation mode. The WISP Repeater mode.
Page 36 of 184
Advertisement
Table of Contents
