General Information - Bosch JLR-100-069 Original Instructions Manual

en-gb | 7 | JLR-100-069

1 General Information

Specifications for Scissors Lift Table
Product Name: Scissors Lift Table
Product Type: Lifting Equipment
Product Number: JLR-100-069
Weight: 628 kg
Maximum Load 1400 kg
Capacity:
Maximum Pneumatic 6 bar (87.02 psi)
Input Pressure:
Maximum Hydraulic 450 bar
Pressure:
Lift Category: 2
Noise Emission: 86 dB(A)
Width: 977 mm
Length: 2295 mm
Height, Completely 580 mm
Collapsed:
Height, Completely 1835 mm
Raised:
Static Test Coefficient: 1.5
Specifications for Platforms
Weight, Static Platform: 55.783 kg
Weight, Extendible 55.645 kg
Platform:
Maximum Load 800 kg
Capacity, Extended
Platform:
Surface Width: 800 mm
Length, Platforms 1806 mm
Completely Pushed in:
Length, Platforms 2136 mm
Completely Extended:
Threaded Holes in M10
Platforms, Size:
Threaded Holes in 47 Nm
Platforms, Max.
Torque::
Intended Use:
To lift, lower, and transport loads, such as a high-
voltage/BEV/PHEV battery, engine, transmission,
seat, fuel tank, or axle.
SP04006297 | 06/2021
Terms of Use:
To be used only by qualified personnel trained in
accordance with the automobile manufacturer's
standards.
Use only for work expressly approved by the
automobile manufacturer.
Use only on level, even, and stable ground.
Use only indoors.
Do not use in corrosive environments (e.g. acidic
or caustic).
Do not use in potentially explosive environments.
Use only at ambient air temperatures between
10 °C and 45 °C.
Use only at a relative humidity between 32 % and
86 %.
Use only at a pneumatic input pressure up to 6 bar
(87.02 psi).
Use for loads only up to 1400 kg. When extending
the platforms, ensure that the load on the
extendible platform does not exceed 800 kg.
Do not use to lift persons or animals.
Use the lifting equipment only with the accessories
that have been expressly approved by the
automobile manufacturer.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany