Position Magazine - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Procedure
See also
Changing a tool type (Page 219)
8.8.1

Position magazine

You can position magazine locations directly on the loading point.
Procedure
Multiple load points
If you have configured several loading points for a magazine, then the "Loading Point
Selection" window appears after pressing the "Position magazine" softkey.
Select the desired loading point in this window and confirm your selection with "OK" to
position the magazine location at the loading point.
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
1.
Select the "Parameter" operating area.
2.
Press the "Magazine" softkey.
1.
The magazine list is opened.
2.
Place the cursor on the magazine location that you want to position
onto the load point.
3.
Press the "Position magazine" softkey.
The magazine location is positioned on the loading point.
Tool management
8.8 Magazine
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents