Sony QM-SS1 Help Manual page 36

Help Guide
Mobile Motion Capture
QM-SS1
When you have finished using the device units
When you have finished using the sensors, be sure to set the sensors in the charging case.
Close the lid of the charging case.
Note
If perspiration or water is left on the charging ports of the sensors, it may impair the ability to charge the sensors. Immediately
wipe off any perspiration or water on the charging ports after use. If the charging ports of the sensors or the charging pins of the
charging case get dirty, wipe them clean with a soft dry cloth.
A: Sensor charging ports
B: Charging case charging pins
When perspiration or dirt is adhered to the straps, wipe it with a soft, dry cloth.
When the sensors get wet
When the sensors get wet, wipe any moisture with a soft, dry cloth.
H-242-100-11(1) Copyright 2023 Sony Corporation
36
TP1001103303