D-Link DAP-1155 User Manual page 186

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Figure 144. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
IP address
Mask
Protocol
Public port
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
A host or a subnet to which the rule is applied. To choose a device
connected to the access point's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
The mask of the subnet.
The protocol available for remote management of the access point.
An external port of the access point. You can specify only one port.
Page 186 of 215
Configuring Device (Router Mode)
Description