Device-Specific Safety Instructions - Siemens SIPROCESS GA700 Compact Operating Instructions

3.4.2

Device-specific safety instructions

NOTICE
Insufficient air circulation around the device
Device damage
The device may overheat in case of heat accumulation.
• Make sure that sufficient air circulates around the rack-mounted device.
• Do not cover the ventilation slit.
• If you install more than one rack-mounted device, maintain a clearance of one height unit
Note
Installation in control cabinets
• Make sure there is adequate ventilation between the devices when installing in control
cabinets.
• Make sure that the permitted ambient temperature listed in the technical specifications is not
exceeded.
Dimension drawing
The following figure shows the dimensions of the rack-mounted device and the distance of the
fastening holes at the mounting brackets. The dimensions are specified in millimeters (inches).
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB
(4.5 cm) to the next device.
Installing/mounting
3.4 Rack-mounted device
33