Get Started; Charge The Battery - Philips TAA6708 User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them in
the charging box and charge the battery for 2
hours for optimum battery capacity and lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting the
earpieces to charge will power them off.
 If the headset is not used for a long time, the
rechargeable battery will begin to lose its
charge. To avoid this loss, please fully charge the
battery at least once every three months.
Charging Box
Plug one end of the USB-C cable into the
charging box and the other end into the
power source.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces. When the
charging box is fully charged, it will fully
recharge the earpieces 3 times.
6 EN
Earpieces
Place the earpieces in the charging box.
• The earpieces start charging and the
blue LED light goes on
• When the earpieces are fully charged,
the blue light will go off
Tip
 Normally, a full charge takes 2.5 hours (for the
earpieces or charging box) by USB cable.