Table of Contents
Advertisement
zone that is not covered by cookware is
automatically switched off after one minute.
• To ensure correct cookware detection and a
even heat distribution, the cookware should be
correctly placed:
- In the front or rear area of the flexible zone
when the cookware is smaller than 22 cm
- Anywhere with bigger cookware
Single big zone
To activate the flexible zone as a single big zone,
simply press the Flexible Zone button.
The power setting works as any other normal zone.
If the cookware is moved from the front to the rear
area of the zone (or vice versa), the flexible zone
automatically detects the new position, keeping
the same power.
To add further cookware, press the dedicated
buttons again, in order to detect the cookware.
Two independent zones
To use the flexible zone as two separate zones with
different power settings, press the Flexible Zone
button to deactivate.
Using the Timer
• You can set it to turn one or more cooking zones
off after the set time is up. The maximum setting
time is 99 minutes.
Setting the timer to turn one or more cooking
zones off automatically
1
If the cooking zone is in use, press the Timer
button repeatedly until the indicator of a
necessary cooking zone comes on. The timer
indicator will start flashing and "00" will show
in the timer display.
2
Set the time by pressing the +/- buttons.
• Hint: Press the +/- buttons once to decrease
or increase by 1 minute.
• Press and hold the +/- buttons to decrease or
increase by 10 minutes.
3
When the timer is set, it will begin to count
down immediately.
4
When cooking timer expires, the
corresponding cooking zone will be switched
off automatically.
NOTE
• Other cooking zones will keep operating if they
were turned on previously.
OPERATION
19
Advertisement
Table of Contents
