D-Link DSN-640 Series Quick Installation Manual page 7

Hide thumbs Also See for DSN-640 Series:

Available languages

Step 4

Power off DSN-6110 or DSN-6410 by switching power button. Remove the empty cage by

loosen the screws and ejection levers.

Screws& ejection levers

Power switch

Step 5

Insert the second controller to the IP SAN storage and secure in place, then power on the

system.

The IP SAN storage should now appear in dual controller mode as either DSN-6120 or

DSN-6420.

Go to "Maintenance\System information" to check that the IP SAN storage is running in dual

controller mode now.

Table of Contents

Dsn-610 series