Panasonic Toughbook CF-52GUNBX2B Reference Manual page 7

Sleep or Hibernation Functions
• When using a PC Card/ExpressCard.
(If the card fails to work normally, restart the computer.)
If a disc formatted with B's CLiP is inserted into the CD/DVD drive (while
puter cannot enter sleep or hibernation. Eject the disc beforehand.
Entering/Resuming from Sleep or Hibernation
To enter sleep or hibernation
1
Close the display, or press the power switch (A) until a beep
sounds.
Sleep: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
You can alternatively use the Windows menu to enter sleep or hibernation.
Click (Start) -
CAUTION
While the computer is entering sleep or hibernation
Do not:
• Touch the keyboard, touch pad, or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Operate the wireless switch.
• Close or open the display.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
It may take one or two minutes to enter sleep or hibernation.
*1
At the beep , immediately release the power switch. After releasing the switch, do not operate it until the power indi-
cator blinks or goes off. If you press and hold the power switch for longer than four seconds, the computer will forcibly
shut down and unsaved data will be lost even if you have set [When I press the power button:] to [Shut down] in
[Choose what the power button does].
*1
If the speakers are muted, beeps do not sound.
In sleep or hibernation
Do not attach or remove a multimedia pocket device and peripheral devices. Doing so may cause malfunction.
Power is consumed in sleep. Power consumption may increase when a PC Card is inserted. When power is
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the sleep function.
- [Sleep] / [Hibernate].
is displayed on the notification area), the com-
*1
7