Intercom Features - Panasonic BB-GT1500 Operating Instructions Manual

Global voip telephone
Hide thumbs Also See for BB-GT1500:
Table of Contents

Advertisement

3
When you finish talking, press
{INTERCOM}.
Note:
L You can locate a misplaced handset
by paging it.
Answering an intercom call
Handset
1
Press {TALK} to answer the page.
2
When you finish talking, press
{OFF}.
Base unit
1
Press {INTERCOM} to answer the
page.
2
When you finish talking, press
{INTERCOM}.
Note for handset and base unit:
L The ringer volume for intercom calls
follows the higher volume level of the
2 lines (page 51, 55).
L When the ringer volume is set to off for
both lines, the handset or base unit
rings at a low level for intercom calls.
Answering an intercom call using
auto intercom
Before using the auto intercom, turn auto
intercom on (page 67).
Handset
1
When you are paged by the base
unit, speak into the microphone.
L To switch to the receiver, press
{s}.
2
To end the intercom, press {OFF}.
Monitoring audio in a room using
auto intercom
Base unit
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
You can listen to the sound in a room
where the handset is located using the
auto intercom (page 67).
Important:
L Before using this feature, set auto
intercom on the destination handset to
"On (Ringer Off)" to allow access
by the base unit (page 67).
1
Call the destination handset (page
68).
L You can listen to the audio.
2
To mute your sound output, press
{MUTE} if necessary.
3
Press {INTERCOM} to stop
monitoring.
Transferring calls, conference
calls
Outside calls can be transferred
between the handset and base unit. The
handset and base unit can have a
conference call with an outside party.
Handset
1
During an outside call, press
{INTERCOM} to put the call on hold.
2
To page the base unit, press {0}.
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {TEL} or {IP} to
return to the outside call.
4
To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the base unit.
To make a conference call:
Press {CONF}.
L To leave the conference, press
{OFF}. The other 2 parties can
continue the conversation.

Intercom Features

69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents