User's Guide
Loading cut sheet media
longer than Super A3/B
(483 mm)
A
Turn on the printer by pressing the
button.
B
Press the
button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is
closed.
D
Make sure that the Paper Check light is on,
and then set the paper lever to the released
position. LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
The paper lever may be locked if REMAINING
PPR SETUP is set to ON: AT ROLL EXCHANGE.
In this case, press and hold the
for 3 seconds to print the barcode, so you
can release the paper lever.
c
E
Load the sheet into the paper insertion slot
until it comes out below.
Note:
Load the sheet vertically, like most magazines.
button
Caution:
Do not set the paper lever to the released
position while the Power light or Pause
light is flashing; otherwise, damage may
occur.
Paper Handling
36