Connection Of Power Line; Unpacking; Checking For Shortage - Acer ATL 1840E Operation Manual

3.2 Connection of power line

1) Make sure the voltage of incoming power supply is the right type that the
machine requires or as marked on the unit.
2) Connect the power wires per electrical code in your area.
3) Power wires, grounding and over-voltage protector should comply with the
local electricity regulations.
For wiring to other voltages, be sure to rewire the spindle motor, coolant pump,
dust suction device and transformer to correct voltage. The relevant currents,
fuses and overload relays are shown in the electrical manual.
NOTICE
Do not turn on the machine motor when its voltage is different from power
voltage and contact electric technician for preparation.

3.3 Unpacking

Remove the top cover of wooden case first and then the plates on four sides.
Carefully take out fittings at first, if necessary. Remove the set screws used for
holding the machine on the base.
Disassembling packing crate and remove skids as possible to avoid damaging
the machine. If the machine is damaged during transportation, contact your
local dealer, insurance company and the transportation company who delivered
your machine immediately.

3.3.1 Checking for shortage

Be sure to check your machine against the packing list which is shipped with
every machine. In case of shortages, note items not received and contact your
local dealer.
3.3.2 Machine lifting