Sony BC-WF1000X Service Manual page 8

WF-1000X
2. Writing the NFC Tag Data
Write the NFC tag data (Bluetooth information) to the NFC mod-
ule in the BC-WF1000X (charging case).
Procedure:
1. Check the Bluetooth address (BD_ADDR).
1 Press the [1] button of the WF-1000XL (L-ch) for more
than 7 seconds to pairing state, and connect it to the PC
with Bluetooth function.
(In order to check the Bluetooth address, it is necessary
to connect the PC and the WF-1000XL (L-ch). It is also
possible to display the Bluetooth address, by the Bluetooth
connect to the walkman (NW-S series or NW-A series etc.)
with Bluetooth function. In this example, describes how to
display Bluetooth address on PC.)
7
Note 1: For the Bluetooth connection method of the PC, refer to the
manual of the PC to be used.
2 Display information of this unit Bluetooth connected on
the PC screen. Then open the property, display the Blue-
tooth address of this unit, and take a memorandum the
Bluetooth address.
(In the Windows 8.1, open the "Control Panel → Device
and Printers" in this order, right click the icon showing the
model name (WF-1000X) of this unit and open its proper-
ties)
"Device and Printers" screen on PC
"Properties" screen
Note 2: Check the device name carefully so as not to confuse Blue-
tooth address with other devices, and take a memorandum.
Note 3: The display method of Bluetooth address may be different
depending on Windows OS.
2. Turn on the NFC function of the smartphone.
8
Right click and
select the "Properties".
3. Start the NFC Tag Data Writing Application on the smart-
phone.
4. Tap the "Write" on the screen of the smartphone.
5. Input the Bluetooth Local Name (BL_NAME).
Tap the "List" on the screen of the smartphone and select the
model name of the this unit, or input the model name with the
keyboard on the smartphone.
6. Input the Bluetooth address (BD_ADDR).
Input the Bluetooth address (BD_ADDR) that was checked by
step 1 with the keyboard on the smartphone.
Note 4: "QR" is not used in this model.
– Continued on next page –