8
9
10
To make detailed settings for an Extended VTR
1
2
416
Setup Relating to DCU
Knob
Parameter
1
Item No
a) 1. Video Port: Number of the video port associated with the serial port to which the setting
applies
For a player, the output port setting
For a recorder, the input port setting
2. Maximum Open Delay: maximum time required to open a file
3. Maximum Cueup Delay: maximum time required to cue up a file
4. Play After Cueup Delay: delay time from the cued-up state to begin playback
5. Stop Delay: delay time from issuing the stop command until actually stopping
6. Still Delay: delay time from issuing the still command until actually stopping
7. Continue Delay: delay time from issuing the continue command until actually stopping
Turn the knob to set the disk recorder video port number or response speed.
When setting the video port number
Knob
Parameter
2
Setting
a) 0: No assignment
When setting the response speed
Knob
Parameter
2
Setting
Press [Set].
This confirms the setting.
If required, repeat steps 4 to 9, to set other items.
In the DCU >Serial Port Assign menu, select the setting target (DCU1 or
DCU2) from the <DCU Select> group.
Using any of the following methods, select the serial port connected to the
Extended VTR for which you want to make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
Parameter
Adjustment
1
Port No
Serial port number
Adjustment
Setting values
Item selection
1 to 7
Adjustment
Setting values
Video port number 0 to 127
Adjustment
Setting values
Response speed
0 to 255
Setting values
1 and upwards
a)
a)
a)