Table of Contents
Advertisement
Sub Menu
Link Order
Format
Audio Input
Channel Name
Automatic
Automatically detects and displays correct terminal order based on
Off
payload when using [2 Sample Interleave].
SDI Signal
Sets the color format and gradation.
Automatic
4:2:2 YCbCr 10-bit
[Automatic]: Sets automatically to match the input signal.
4:2:2 YCbCr 12-bit
• The HD-SDI signal is either [4:2:2 YCbCr 10-bit] or [4:2:2 ICtCp 10-bit].
4:4:4 YCbCr 10-bit
• If [Automatic] is selected, they are rendered in a Payload that is selected in the
4:4:4 YCbCr 12-bit
order A → B → C → D.
4:2:2 ICtCp 10-bit
• The settings for correctly displaying ICtCp format signals are as follows.
4:2:2 ICtCp 12-bit
- [Picture Mode]: [ITU-R BT.709] or [ITU-R BT.2020]
4:4:4 ICtCp 10-bit
- [Color Gamut]: [ITU-R BT.709] or [ITU-R BT.2020]
4:4:4 ICtCp 12-bit
- [Gamma/EOTF]: [SMPTE ST 2084 (PQ)] or [Hybrid Log-Gamma]
4:4:4 RGB 10-bit
• If you need to use the ICtCp format for SDI signals, select any of the following to
4:4:4 RGB 12-bit
match the signal: [4:2:2 ICtCp 10-bit], [4:2:2 ICtCp 12-bit], [4:4:4 ICtCp 10-bit],
4:4:4 XYZ 10-bit
[4:4:4 ICtCp 12-bit]
• To use 4:4:4 XYZ 10-bit for SDI signals, select [4:4:4 XYZ 10-bit]. Then, signals
4:4:4 XYZ 12-bit
will be processed as signals where XYZ data is included in RGB data output in
HDMI Signal
4:4:4 RGB 10-bit format.
Automatic
• With SDI signals, when [Color Gamut] is set to [Cinema Gamut to XXX] or
[S-GamutXXX], or when [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or
[Canon Log 3], operation changes as follows according to the color format.
-
-
[Select Input Signal]
Sets the audio terminal.
When [Quad Input]
Automatic, Input A,
[Automatic]: Sets automatically to match the input signal.
Input B, Input C, Input D
• For [Select Input Signal]
When [Dual Input A,B]
Automatic, Input A,
Input B
When [Dual Input C,D]
Automatic, Input C,
Input D
Sets the name of the selected channel. You can input up to 16
alphanumeric characters.
Setting Options
ICtCp/RGB:
Operates as YCbCr
XYZ:
Operates as RGB
[Automatic] or [Single Input], it is fixed at [Automatic].
OSD Menu
35
Advertisement
Table of Contents
