Table of Contents
Advertisement
Before installation
Items to prepare
The items that you need to provide in advance in addition to the supplied parts to mount this product to a wall or
ceiling are as follows.
„ This product is a tool used for mounting the projector (optional) to a wall or ceiling. Use it to
„
install a compatible projector.
Compatible projectors: PT-JX200FBK / PT-JX200FWK
„ The following parts are required when mounting the attachment plate to a wall or ceiling.
„
Please prepare the suitable commercially available products depending on the structure of
the wall or ceiling and the installation method.
The number enclosed in < > is the quantity.
Structure of mounting area
For the wall or ceiling with wooden
reinforcement
For concrete beams or alike
(Bolt diameter: M10)
For wooden beams or alike
(Bolt diameter: M10)
„ A work bench and a soft cloth to prevent scratches are necessary when mounting the
„
projector mount bracket to the projector.
Prepare a bench for the mounting work with a height of at least 250 mm (9-27/32") and lay a soft cloth or the
like below the projector to prevent scratches.
„ Disposal
„
When disposing of this product, ask your local authority or dealer about the correct disposal method.
Ensure there will be thread engagement of at least 20 mm
(25/32") in the wall or ceiling reinforcement member; (round
head) wood screws with nominal diameter of 4.1 mm (5/32")
<5> and 3.1 mm (1/8") <4>
Hanging bolt <2>
Hexagonal nut <6>
Flat washer <6>
Spring washer <4>
Anchor nut or curled plug <2>
Hanging bolt <2>
Hexagonal nut <8>
Flat washer <8>
Spring washer <4>
Main unit
Bench to adjust height
Soft cloth or alike
(If necessary, use a plate or corrugated
paper, etc.)
Commercially available parts
Power supply unit
Soft cloth or alike
Base
Work bench
(Table or box, etc.)
ENGLISH - 7
Advertisement
Table of Contents
