Canon LX-P1300 User Manual page 164

Color label printer
Hide thumbs Also See for LX-P1300:
Table of Contents

Advertisement

Chapter 4 Troubleshooting
Condition
The color deviation appears in the
print result.
The halftone representation is coarse.
The area around characters or the layer
areas appear uneven.
Overall appearance of the printed
output is not satisfactory.
Printed paper is wavy and rubbing
marks are left on the paper.
The color printed differs from the
color on screen.
158
Confirm that the paper set (size, shape, and type) that displays color
deviation matches the paper (size, shape, and type) configured by the
application software or printer driver is the same.
Adjust the position of the print head.
Set the resolution to [Input resolution 1200dpi] (prioritize image
quality) and then print.
(P.50)
Open the [Color] tab of the printer driver, and set the [Half-tone] to
[Error Diffusion].
(P.50)
Open the printer driver's [Color] tab and set the [Half-tone] to [Error
Diffusion].
(P.50)
Confirm that the paper set (size, shape, and type) matches the paper
(size, shape, and type) configured by the application software or
printer driver.
Use dedicated paper.
When paper other than dedicated paper is used the print quality may
be low. Also, it may cause paper jams and malfunctions.
Verify that the paper set (size, shape, and type) matches the paper (size,
shape, and type) configured by the application software or printer
driver.
Set the resolution to [Input resolution 1200dpi] (prioritize image
quality) and then print.
(P.50)
Verify that the paper set (size, shape, and type) matches the paper (size,
shape, and type) configured by the application software or printer driver.
Open the [Utility] tab of the printer driver and print after setting [Prevent
Paper Rubbing Mode] from [Special Settings].
Open the [Color] tab of the printer driver, and adjust the settings for
image quality and color.
(P.50)
Verify that the [Display] and [Screen Properties] are correctly configured
in the control panel of the computer used. Especially if the type of
display or gamma factor is wrongly configured, the proper color will not
be displayed.
Solution
(P.119)
(P.89)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx-d1300

Table of Contents