2-4.
Rear Case Assembly
Preparation
1.
Remove the docking module. (Refer to
2.
Disconnect the battery harness from the RE-340 board. (Refer to
Procedure
1.
Remove the inside panel assembly.
(1) Open the memory slot cover.
(2) Remove the two screws.
(3) Remove the four hexagon socket bolts, and then remove the inside panel assembly.
(4) Remove the button (slot select).
Memory slot cover
AXS-R7
"2-2. Docking
Module")
P2 x 3
Button (slot select)
"2-3. Battery
Harness")
Hexagon socket bolts
M3 x 5
(size: 2 mm)
Inside panel assembly
2-5