Epson KDS Multi Station Quick Start Manual page 5

3. Connect an ethernet cable from the printer to the same router/network switch:
4. Connect the VGA cable between the monitor and the printer.
Note: If you are using a touchscreen monitor, use a USB cable to connect the monitor to
one of the available USB Host (Type A) ports on the printer.
Form: F-730-028 v1.00
If you are using a touchscreen monitor, skip Step 5.
KDS Multi Station
Quick Start Guide
Page 5 of 26
Picture 2.3
VGA Cable Connection
Picture 2.4
111-38-URM-003
R2.30