Default Access Roles; Set Up And Create A New Rbac Security Control File - ABB RMC-100 User Manual

NOTICE – Security override: After RBAC is implemented it overrides the device-enforced
bi-level security and PCCU32-enforced security. When RBAC is enforced, it replaces all other
security and specifically implements on a port-by-port basis.
6.6.1

Default access roles

Default roles are automatically available in PCCU32:
–
Administrator
–
Expert
–
Advanced
–
Basic
–
File Admin
The Administrator role has the highest-level access rights to all functions. Administrators add users,
define roles, and save security configuration files to a PC. Expert, Advanced, and Basic roles have
decreasing levels of access rights. The File Admin role has the access rights of the Basic role plus
minimum rights required for sending and reading RBAC security files to and from G5 and newer
devices. The security files can upload to multiple flow computers for implementation.
6.6.2

Set up and create a new RBAC security control file

To set up a new RBAC security system:
–
Create a security control file.
–
Create an administrator account.
–
Create individual user accounts and assign default roles.
–
Create customized roles if necessary.
–
Configure communication ports.
–
Save the security file.
1. Launch PCCU32 and click Operate > Security > Role Based Access Control > Role
Administration on the top menu bar.
Figure 6-4: Configure Role Administration
1 0 4 | R MC-1 00 | 2 10 5 55 2MN A E