12. TECHNICAL INFORMATION................16 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Page 3
ENGLISH injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 General Safety This appliance is intended to be used in household and • similar applications such as: farm houses; staff kitchen areas in shops, offices and –...
ENGLISH Authorised Service Centre to replace recommend only the use of original the water inlet hose. spare parts. • When you contact the Authorised 2.4 Use Service Centre, ensure that you have the following information that is • Do not sit or stand on the open door. available on the rating plate.
Cutlery basket Upper basket Lower basket 4. CONTROL PANEL On/off indicator Start button Programme marker Programme knob Indicators Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates.
ENGLISH 5. PROGRAMMES Programme Degree of soil Programme Consumption values Type of load phases Duration Energy Water (min) (kWh) Normal soil • Prewash 1.039 Crockery and • Wash 50 °C cutlery • Rinses • Dry Heavy soil • Prewash 140 - 160 1.3 - 1.5 13 - 15 Crockery, cut- •...
Page 8
How to set the programme and on the appliance. selection mode The higher the content of these minerals, the harder your water is. Water hardness The appliance is in programme selection is measured in equivalent scales.
ENGLISH 4. Press Delay again and again to • The indicator starts to flash. change the setting. Each time you • The indicators Start and on/off press Delay the level number continues to flash. increases. After level 10 you will start •...
7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 11
ENGLISH Starting a programme with delay start 1. Set the programme. 2. Press Delay to delay the start of the programme of 3 hours. The delay indicator comes on. 3. Press Start. Start indicator comes on. When the countdown is completed, the programme starts.
9. HINTS AND TIPS 9.1 General • Detergent tablets do not fully dissolve with short programmes. To prevent The following hints will ensure optimal detergent residues on the tableware, cleaning and drying results in daily use we recommend that you use the and also help to protect the environment.
ENGLISH • Make sure that the spray arms can • The correct quantity of detergent is move freely before you start a used. programme. 9.6 Unloading the baskets 9.5 Before starting a programme 1. Let the tableware cool down before Make sure that: you remove it from the appliance.
CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
Page 15
ENGLISH Authorised Service Centre, check if you With some problems the end indicator can solve the problem by yourself with the flashes intermittently indicating a help of the information in the table. malfunction. Problem and alarm code Possible solution You cannot activate the appliance. •...
Problem Possible solution There are stains and dry wa- • The released quantity of rinse aid is not sufficient. ter drops on glasses and Adjust the rinse aid selector to a higher position. dishes. • The quality of the rinse aid can be the cause.