Control Panel; Water Treatment Process Diagram - Toshiba TWP-TSR75SHKW Instruction Manual

2-2 Control panel

Filter life indicator
Raw water/puri ed
water tank water
shortage indicator
200ml Quantitative button
Button instructions
6 Water temp options
• 93°-99° Boiled water
• 80°-85° Green tea
• 58°-62° Honey water
• 53°-57° Warm water
• 46°-50° Formula milk
• Ambient water
Water shortage
If the raw water tank is lack of water, the indicator keeps on;
If the puri ed water tank is lack of water, the indicator ashes, and water cannot be discharged at this
time.
Standby and wake up
The whole machine enters the standby state and screen is o if it is not operated for 3 mins;
In standby state, the machine can be waked up by pressing any key.
200ml Quantitative state
Click the Quantitative button, it turns on, the machine enters the quantitative water output mode,
and quantitative output is 200mL;
Click the Quantitative button, it turns o , the quantitative mode is cancelled.
Replace the filter
With the use of the lter, the three small grids for reminding the lter life will turn o one by one.
When the lter life expires, the three grids will ash synchronously to remind the user to replace
the lter;
After replacing the lter, hold the Filter reset button for 3 seconds to reset the lter life.

2-3 Water treatment process diagram

Exhaust vent
Nozzle
Water outlet button
Raw water
Hot water
Instant heater
6
Integral
composite
lter
puri ed water
UV
puri ed
water
tank
puri ed water
UV antibacterial indicator
Temperature selection area
Filter reset button
Concentrated
water