Slide Options - Siemens Healthineers ADVIA Quick Reference Manual

Manual Slide Staining
1. Verify the ADVIA 2120 / 2120i is not
processing samples.
2. Select Operations > Autoslide Control
3. On the Autoslide Control screen, select
Manual/Inlet Door > Start
4. Allow the door to open with the smear facing
right and frosted end up. Insert the slide in
the holder door.
5. Close the Manual/Inlet door.
6. The system will process the slide.
7. When cycle is complete, the Manual/Inlet
door will open for the additional slides.
8. If no additional slides need to be stained
close Manual/Inlet Door and return to routine
analyzer and Autoslide routine operation.

Slide Options

10