Advertisement
Chapter 1
5) Remove the locking screw [1] from the locking
lever.
6) Shift the locking lever [1] of the developing
assembly to the left to free the developing
assembly.
7) Remove the screw [1].
1-2
F-1-5
F-1-6
F-1-7
8) Remove the drum [1].
9) Take out the new drum unit from its wrappings.
10) Remove the unlocking member [1] from the new
drum unit.
F-1-10
11) Insert the new drum unit [1] in the machine.
- Do not touch the surface of the photosensitive drum.
- Make sure that the surface of the photosensitive
drum is not exposed to light for a long time.
F-1-8
F-1-9
Advertisement
