Hitachi CHROMASTER 5160 Instruction Manual page 319

(c) Setting the Spectral Data to be Output ("3" key followed by
ENT key)
RECORD SPECTRUM NO. (1–3)
1
Press [numerical] key (within [1] to [3]), and then the [ENT]
key.
Next, input the spectrum No. for output.
In ABS data mode:
The output wait screen appears.
RCD NO. SPEED
1 60
Press the [START] key.
During spectrum output, the following screen is presented.
RCD NO. WL
1 250
In the REF data mode:
The output wait screen appears.
RCD NO. SPEED
1 60
When the spectrum has been acquired with the W lamp, "W
REF" is indicated.
When the spectrum has been acquired with the Hg lamp,
"Hg" is indicated.
Press the [START] key.
During spectrum output, the following screen is presented.
RCD NO. WL
1 250
3 - 37
WL-RANGE MODE: ABS
200 – 600 PRESS "START"
ABS SPEED
0.0000 60
WL-RANGE MODE: D2 REF
200 – 600 PRESS "START"
REF SPEED
300000 60
3.4.2