External Power Supply - Siemens SIMATIC PG 720 P Product Information Bulletin

External Power The external power supply supplies power to the PG 720 when it is operated
Supply
using 120 V and 230 V mains power. The voltage range is set automatically.
When the programming device is run on mains power, the integrated
rechargeable battery is charged automatically. The connecting cable to the
PG 720 is permanently connected to the external power supply. A socket on
the external power supply enables you to connect it to the mains supply.
Caution
!
Risk of damage to the device.
The PG 720 may only be operated with the correct external power supply
enclosed with the device.
Note
The power plug must be disconnected to isolate the unit completely from the
supply.
For operation in Canada and the USA, a CSA or UL-listed power supply
cable must be used.
For the United States and Canada:
In the United States and Canada the cord must be UL-listed and CSA
Labelled. The male plug is a NEMA 5-15 style.
For operation with 120 V:
Use a UL-listed, CSA Labelled Cord Set, consisting of a min. 18 AWG.
Type SVT or SJT three conductor flexible cord, max. 4.5 m (15 feet) in
length and a parallel blade grounding type attachment plug, rated 15 A, min
125 V.
For operation with 240 V (within the USA):
Use a UL-listed, CSA Labelled Cord Set, consisting of a min. 18 AWG.
Type SVT or SJT three conductor flexible cord, max. 4.5 m (15 feet) in
length and a tandem blade grounding type attachment plug, rated 15 A,
250 V.
For operation with 230 V (outside of USA):
Use a Cord Set consisting of a min 18 AWG cord and grounding type
attachment plug rated 15 A, 250 V. The connecting cable should have the
appropriate safety approvals for the country in which the equipment will be
installed and marked.
The unit is intended for operation with grounded power supply networks
(TN networks, VDE 0100 part 300 or IEC 364-3).
The unit is not intended for operation with non-grounded or
impedance-grounded systems.
The connecting cable must meet the necessary safety requirements in the
respective country.
PG 720 P Product Information Bulletin
C79000-K7076-C721-01
13