Acc; Configuration; Counter; Counters - Canon imageRUNNER 1750 Series Service Manual

#ACC

■ Configuration

The table below gives summary description of the accessories available.
Item1 Item2
#ACC CARD Card reader installation setting
Enter a card number to use.
(0 to 9999. One hundred cards are registered with the department ID beginning
from the input card number in sequence.)
*1:1,000 cards if option ROM is mounted.
When a card number is entered, the following kinds of management information
are initialized:
- Card name (department ID), beginning from the input card number.
- Password associated with the card
CC-SPSW Control card I/F support setting
Set whether to support the control card I/F (CC-V) or not.
0: Do not support.
1: Support.
COIN Coin vendor change
Set the control card set display appearing on the operator station for vendor
use.
0: Control card use
1: Coin vendor use
CONTROL Set the PDL printer output control where the control card I/F (CC-V) is
supported.
0: Enable printing without a card mounted.
1: Enable printing with a card mounted in position.
8
Service Mode > Details of Service Mode > #COUNTER > Counters
Explanation
T-8-51
8 Service Mode > Details of Service Mode > #COUNTER > Counters

#COUNTER

■ Counters

This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be
used to gain rough measures of when to replace supplies. The counter set increments by one
on counting each sheet.
Maintenance counter list
Item Counter
TOTAL (Total counter) SERVICE1
SERVICE2
TTL
COPY
PDL-PRT
FAX-PRT
MEDIA-PRT
RPT-PRT
2-SIDE
SCAN
PICK-UP (Paper pickup counter) C1
C2
C3
C4
MF
2-SIDE
FEEDER (Feeder related counters) FEED
DFOP-CNT
SORTER (Finisher related counters) SORT
SADDLE
SDL-STPL
JAM (Jam counters) TTL
FEEDER
SORTER
2-SIDE
MF
C1
C2
C3
C4
MISC (Other required counter) WST-TNR
8-42
Explanation
Service total counter 1
Service total counter 2
Total counter
Total copy counter
PDL print counter
Fax print counter
Media print counter
Report print counter
Double-sided copy/print counter
Scan counter
Cassette 1 jam counter
Cassette 2 jam counter
Cassette 3 jam counter
Cassette 4 jam counter
Manual feed tray pickup total counter
Double-sided paper pickup total counter
Feeder pickup total counter
ADF open/close hinge counter
Finisher sort path counter
Finisher saddle operation counter
Finisher saddle staple operation counter
Unit total jam count
Feeder total jam count
Finisher total jam count
Duplex unit jam counter
Manual feed tray jam counter
Cassette 1 jam counter
Cassette 2 jam counter
Cassette 3 jam counter
Cassette 4 jam counter
Waste toner counter
T-8-52
8-42