NEC Express5800 Series User Manual page 166

Chapter 5 Administrative Utilities and Settings
Set-CriticalThreshold <size>
Sets the threshold (in MB) for a critical alarm to be issued in the current session.
Servicing
Configures UWF Servicing Mode.
Enable
Enables UWF Servicing Mode in the next session after the system restarts.
Disable
Disables UWF Servicing Mode in the next session after the system restarts.
Update-Windows
Command used to apply the Windows Update program to standalone devices.
Get-Config
Displays the UWF Servicing Mode configuration for the current and next sessions.
166
Important You can change the maximum size of the UWF overlay by using Atrust Client Setup. See Chapter
4, "2.9 Configuring UWF (Unified Write Filter)" for how to change this setting. The overlay storage
type and threshold values for issuing warning or critical alarms cannot be changed by using Atrust
Client Setup.
Important US320f does not support Windows Update in UWF Servicing Mode. Do not use UWF Servicing
Mode.
To upgrade the firmware of US320f, use Atrust Device Manager (ADM). For detailed information,
see Chapter 6, "1. Using Atrust Device Manager (ADM) Software for Remote Administration".
Express5800/US320f User's Guide
3. Using the Unified Write Filter (UWF)