Radius Authentication - Motorola APEX1000 Installation And Operation Manual

Parameter
UDP Port
Fast Ethernet
Interface
PID Number
DTA Enable

RADIUS Authentication

Remote Authentication Dial-In User Service (RADIUS) is a client/server protocol,
established to manage modem pools. Its main objective is the centralized management
of user access policy; at its core is a standard framework for the exchange of Attribute-
Value Pairs (AVPs).
RADIUS AAA functions comprise three elements:
•
Authentication – The function of checking user credentials (username and
password)
•
Authorization – The function of defining the rights or privileges available after the
user is authenticated. For example, super user vs. read only user
•
Accounting
Note: The current APEX firmware only supports Authentication, Authorization and
Integration with a SecurID server. RADIUS Accounting will be supported in a future
release of the APEX1000.
Configuration • RADIUS Authentication
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Description
UDP port of Network PID.
Range: 1024 – 65535
The default is 6001. (Matches the default value configured in the DAC.)
Ethernet Interface for PID stream.
Physical Host Ethernet Port (ENET-1 or ENET-2)
The default is ENET-1.
Network PID to retrieve from input stream and insert on output stream (no
remapping).
Network PID (0x1C00-0x1FFE)
The default is 0x1FFC.
Enables DTA message insertion on selected OTS / QAM channel.
Range: Enable, Disable
The default is Disable. (No checkmarks in any of the boxes.)
– The function of tallying time and resource usage for each user
B
90