Model: Motorola Flex Smart Safe - Motorola Bolt Smart Safe User Manual

2. With the main door open, press and hold the "ENT" key until the safe beeps.
3. Enter any 4-8 digit key length combination on the keypad, then press the "ENT" key. The
safe will beep, and the "Status" LED will flash yellow three times and then turn solid.
4. Re-enter the same combination again and then press the "ENT" key to confirm the new
user access code.
If the combination is accepted, the safe will beep, and the "Status" LED will flash green three
times. Otherwise, the LED will flash red three times, and you must close the main door and then
repeat steps 1 through 3.
Turn on Connected Mode
Your Bolt Smart Safe is internet-enabled with support for smartphone notifications. We
recommend enabling Connected Mode to get full use of your safe. You can always change back
and forth at any time. If internet connectivity is lost or out of range, the Smart Safe will securely
default to Offline Mode.
Please download the Motorola Smart Safe app on the App Store® for iPhone® or Google Play™
from your Android device to use Connected Mode. A er installing the Motorola Smart Safe app,
follow the on-screen app instructions to set up your Bolt Smart Safe.
When using the Motorola Smart Safe app to set up your Bolt Smart Safe, you will automatically
register the product and activate the warranty.
Turn on Tamper Detection Mode
With the main door open, Press the "0" key for 5 seconds until the safe beeps. Tamper Detection
Mode will toggle between "Off" (factory default) and "On" with each use of this sequence.
Register Your Safe
Registering your safe serves as proof of ownership and ensures access to Smart Safe support
services. Your safe came with a Registration Card containing your security registration code. You
are responsible for keeping this information safe.
Download the Motorola Smart Safe app or register online at smartsafe.com/support.

Model: Motorola Flex Smart Safe

Your Flex Smart Safe can be up and running in minutes in Offline Mode using the included Quick
Start Guide. We recommended completing the installation by turning on Tamper Detection and
ITSmart Security, LLC
13