Bosch UniversalChainPole 18 Original Instructions Manual page 16

16 | English
Cordless pole pruner
Chain speed (no-load)
Blade length
Max diameter of cut
Chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic chain oiler
Height adjustment
Pivoting head, 9 positions
Weight according to EPTA‑Procedure 01:2014
Serial number
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A)
Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to EN 62841-1
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-1
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
F 016 L94 358 | (10.12.2021)
A)
and storage
dB(A)
dB
2
m/s
2
m/s
Starting Operation
For Your Safety
Before any work on the machine itself (e. g. mainten-
u
ance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch with the locking button.
Do not activate switches until battery is fully at-
u
tached.
Inserting/Removing the Battery (see figures D
and O)
Note: Using unsuitable batteries can lead to malfunctions of
or cause damage to the power tool.
Insert the charged battery (17) onto the telescopic handle.
Make sure that the battery is fully fitted.
UniversalChainPole 18
m/s
cm
cm
3/8"–90PX033E
mm
ml
m
°
kg
See serial number (type plate) on
the machine
°C +10... +35
°C -20... +50
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0
Ah, 5.0 Ah, 6.0 Ah
3 600 HB3 1..
Bosch Power Tools
4.0
20/8"
145
1.1
33
60
●
2.1-2.6
120
3.8
78
4
1.0
1.5