Industrial 2 Of 5 Set Length 1 - HP Linear Barcode Scanner II Programming Reference Manual

Symbologies

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
Mode, or the first fixed length if in Fixed Length Mode. Length includes the bar
code's data characters only.
The length can be set from 1 to 50 characters, and includes check and data
characters. See
instructions.
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Programming Reference Guide
184. Length 1 is the minimum label length if in Variable Length
"Set Length 1"
$CU2L1
DEFAULT
on page 257 for more detailed programming
01 = Length 1 is 1 Character
Enter/Exit Programming Mode
Industrial 2 of 5 Length
~
CANCEL
185