Related Manuals for Sony HKCU-REC55
Summary of Contents for Sony HKCU-REC55
- Page 1 5-014-053-11 (2) Recording Option Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. HKCU-REC55 © 2019 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Overview .............. 3 System Configuration........... 4 Name and Function of Parts ......... 6 Front Panel..............6 Rear Panel............... 7 Preparation and Configuration......8 Configuring Using the CCU..........8 Configuring Using the Web Menu ......... 8 Accessing the Web Menu ..........8 Network Settings ............ -
Page 3: Overview
Overview The HKCU-REC55 Recording Option is designed to be installed in an HDCU5500/3500 Camera Control Unit and enables recording of signals from a camera connected to the camera control unit (CCU). It is equipped with internal storage memory, which supports recording and playback, and supports file transfer to external storage, such as a USB drive or NAS. -
Page 4: System Configuration
System Configuration Connection example (when using a USB drive) 4K monitor HD monitor CCU with HKCU-REC55 installed EXT connector USB drive CCA-5 PWA-RCT1 RCP-3000/1000 series Web menu SDI (main signal) - Page 5 Connection example (when using NAS) Reference signal Timecode Optical fiber 4K monitor cable HD monitor CCU with HKCU-REC55 installed Optical fiber cable Switcher/router CCU with HKCU-REC55 installed Optical fiber cable CCU with HKCU-REC55 10G LAN installed PWA-RCT1 Nonlinear editor Web menu 3G-SDI×4/12G-SDI (main signal)
-
Page 6: Name And Function Of Parts
When flashing blue, do not turn off the CCU. ALARM indicator Off (not lit): Operating normally. Lit red: An error occurred on the CCU or HKCU-REC55. USB ACCESS indicator Lit green: USB drive is connected and mounted. Flashing green: USB drive is being formatted. -
Page 7: Rear Panel
LAN COM connector (RJ-45 8-pin) Used to connect to a LAN. Enables access to the web menu of the HKCU-REC55, web menu of the CCU, and the PWA-RCT1. Connect a LAN hub (10BASE-T/100BASE-TX/ 1000BASE-T), using a LAN cable (shielded type of category... -
Page 8: Preparation And Configuration
Network 2 ( (LC optical) connector) settings Preparation and Configure the following in [Network2(10GbE)]. Configuration Menu item Setting IP Address Register an IP address different from network 1. (Default value: 192.168.10.10) Subnet Mask Register the subnet mask. Configuring Using the CCU Default Gateway Displays the default gateway registered for network 1 (display only). -
Page 9: Logging In And Logging Out
[Record Settings] and [Sub-Record Settings]. Configure the input/output settings in the menu of the CCU and the web menu. To record in 4K format using the HKCU-REC55, install the Timecode Settings HZCU-UHDR50 4K/HDR recording license, and select either UHD-SDI A or SDI-OUT 1 as the 4K output. -
Page 10: Audio Settings
Configure the character information to be superimposed Menu item Description using [Character] on the [System] screen > [Setup] tab of the Timer Select Selects the time data to display. web menu. Timer Set Sets the time counter. Menu item Description Character On/Off Sets whether to superimpose character Replay port settings... -
Page 11: Storage
The unit may not operate correctly if a USB drive other than recorded material as possible in the event that an those above is used. If this occurs, contact your Sony unforeseen accident occurs, but there is no guarantee service or sales representative. -
Page 12: Nas
Connecting a USB drive Recording, Playback, and Connect the USB drive to the USB connector on the front panel of the unit. The USB drive is mounted automatically File Operations when it is accessed from the PWA-RCT1 or web menu. When removing the USB drive, first unmount it from the PWA-RCT1 or web menu. -
Page 13: File Operations
To set repeated playback, set [Continuous Mode] to [Single To delete multiple files, place a check mark in the File Repeat] on the [Port] screen > [Replay] tab of the web checkboxes for the files you want to delete, and then click menu. -
Page 14: Ccu Menu
Page No. <BOARD STATUS> OK, POWER ERROR, PLD ERROR, HKCU-REC55 board self-diagnostics result TEMP WARNING, ISO REC WARNING, ISO REC ERROR <VERSION> ENC1(XAVC) ROM version of ENC1 PLD (XAVC) (HKCU-REC55 board) ENC2(REC55) ROM version of ENC2 PLD (REC55) (HKCU-REC55 board) -
Page 15: Web Menu
CCU Web screen: Displays the web menu screen of the CCU. You can return to the web menu of the HKCU-REC55 by selecting “ISO REC” from the context Web Menu Organization menu of the web menu screen of the CCU. For details about this screen, refer to the operating instructions The web menu comprises the following screens. -
Page 16: Home Screen
Home Screen Displays the operating status of the unit’s ports and the network. The Home screen supports simple display mode and detail display mode. You can switch mode using the [Simple]/ [Detail] buttons. Clicking the button, turning it on, updates the screen display automatically. - Page 17 Timecode display Remaining capacity Displays timecode data (TCG). Displays the remaining memory capacity. In detail display mode, UBG, TM1, and TM2 are also [FILE] displayed simultaneously. Displays the video format of the recorded file. [Setting] button (page 24) ...
-
Page 18: Status Screen
Status Screen Displays a list of errors and warnings that have occurred on the unit, and the power supply status. When the button is on, the display updates automatically. Error/Warning Status Displays a list of errors and warnings. -
Page 19: System Screen
System Screen Makes basic settings for the unit. Board tab Makes input/output board settings using [Change Current Settings]. “Settings configured in the For details about settings, see web menu” (page 9) Step 1: Record Settings Select the format for the main recording. Step 2: Sub-Record Settings Turn simultaneous recording on/off, and set the video format for simultaneous recording. - Page 20 Setup tab Makes basic operating mode settings of the unit. System Parameters Timer Select Selects the time data to display. Frame PB Mode • TC Selects the playback mode during variable speed playback. • UB • Field: Field playback • TM1 •...
- Page 21 Character Info. Sets the character information content if [Character On/Off] is set to On. • Timedata & Others • Timedata Only: Timer counter only • Timedata & VITC: Timer counter and VITC • Timedata & TM1: Timer counter and TM1 •...
- Page 22 Network tab Makes network settings. Network 1 (1GbE) Sets the IP address, subnet mask, default gateway, and MTU of the LAN COM connector. It also displays the MAC address of the LAN COM connector. The following values are the factory default values. IP Address: 192.168.0.10 Subnet Mask: 255.255.255.0 Default Gateway: 0.0.0.0...
- Page 23 Bank tab Makes settings for user banks for saving settings. Bank Recall Factory Setting Recall without IP Address Click the [Recall] button to return the settings on the System screen to their default factory values. The network IP address settings are not initialized. Power tab Use to log out from the web menu.
-
Page 24: Port Screen
Port Screen Makes settings for each port of the unit. Record tab Port information Displays the operating status of the selected port. The Makes timecode settings. display is the same as on the Home screen. TCG Source Selects the source signal for synchronizing the internal Option timecode generator. - Page 25 Timer Set Audio Displays the time counter. Internal Audio SG To change the counter, enter a value and click the [Set] button. Clicking the [Reset] button resets the counter. Selects the type of signal output from the internal signal generator. Note •...
- Page 26 Muting Shuttle Muting Sets whether to output the audio signal during shuttle playback. • Off: Output • On: No output VAR Muting Sets whether to output the audio signal in variable-speed playback modes other than normal playback (PLAY). • Off: Output •...
-
Page 27: File Screen
File Screen Displays a list of the files stored in the unit. You can filter the files to display only the required files. Select Condition Select All Displays all files in the list. Select Port Configuration Displays files filtered by system frequency, scanning method, resolution, and codec. -
Page 28: Storage Screen
Storage Screen Displays information about storage and configures the storage of the unit. Info tab Displays the status of the internal storage of the unit. Storage Capacity Volume Label Displays the volume label of the internal storage. Total Size Displays the total capacity of the internal storage. Storage Information Displays information about the internal storage. - Page 29 Setup tab FS Format Formats the file system. All recorded data is deleted. Logical Format Formats the logical file system. Use to recover memory, when required, due to power outage while writing data to internal storage or other cause. All recorded data is deleted. FS Salvage Salvages the file system.
- Page 30 External tab Makes settings for external storage (USB drive, NAS). USB Storage Information Displays USB drive information. Model Name Displays the model name of the USB drive. Serial Number Displays the serial number of the USB drive. Remaining Displays the available recording capacity of the USB drive. USB Storage Settings Mount Mounts a USB drive.
-
Page 31: Usage Precautions
For details on parts replacement, contact your dealer. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES,... -
Page 32: Troubleshooting
If the error message appears again when the unit an internal system error, the ALARM indicator on the front is turned on, contact your Sony representative. panel lights up red, and an error message appears on the For details about error and warning messages, refer to the web menu screen. -
Page 33: Warning Messages
Warning Messages When one of the problems described below is detected by the number of errors is indicated to the right of the warning the unit, a warning mark appears on the status bar of the mark. web menu. Operation can continue even when the warning After a warning message appears, resolve the cause of the mark appears. -
Page 34: Specifications
WARRANTY, OR FOR ANY OTHER REASON Input/output connectors WHATSOEVER. 4K/HD SDI OUTPUT BNC (1) • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND (UHD SDI B) 12G/6G/3G-SDI MADE BY USERS OF THIS UNIT OR MADE BY THIRD SMPTE-2082, SMPTE-424M/425M, PARTIES.