Kenwood FL-180 Instruction Manual page 5

Output terminals
Recording output signal
Signal frequency:
Accuracy:
Output voltage:
Output impedance:
Distortion factor:
Drift output terminal (DRIFT)
Output voltage:
Output impedance:
Scope output terminal (TO SCOPE)
Output voltage:
Output impedance:
Recorder output terminal ( R E C O R D E R )
Output voltage:
Output impedance:
Power requirements
Voltage:
Power consumption:
Operating temperature:
Dimensions:
Weight:
Accessories:
3 kHz, 3.15 kHz
± 5 x 1 0 ~ 5
0.2Vrms ± 2 0 % (open output)
60012 ± 2 0 % (unbalanced)
Less than 1 % ( 6 0 0 0 terminated)"
- Approx. DC±1 V, for each ± 1 % of frequency drift
6 0 0 0 ± 2 0 % (unbalanced)
Approx, 3Vrms of full scale
6 0 0 0 ± 2 0 % (unbalanced)
Approx. DC 1V of full scale
6 0 0 0 ± 2 0 % (unbalanced)
AC 1 0 0 / 1 2 0 / 2 2 0 / 2 4 0 V ± 1 0 % , 5 0 / 6 0 Hz
Approx. 1 4 W
0 ~ 4 0 ° C
Width 2 6 0 mm
Height 1 50 mm
Depth 3 1 8 mm
Approx. 5.3 kg
Connecting cord with plugs and clips
(CA-36)
AC cord.................................................................. 1 piece
Instruction manual
Replacement fuse
(0.5A)...
(0.3A)
\ " "
1 piece
1 copy
'
2 pieces
2 pieces
5