Connecting A Setup Terminal To The Gr4000 - Hitachi GR4000 Series Installation Manual

4.9

Connecting a Setup Terminal to the GR4000

A setup terminal should be connected to the CONSOLE port of BCU using the RS-232C
cross cable (with D-sub 9 pins on both ends（female）).
Figure 4.9-1 Setup terminal connected to the GR4000
520-10-014-20X
CONSOLE port
RS-232C cross cable (with D-
sub9 pins (female) on both ends)
GR4000 Installation Guide Version 1.00 - Preliminary
Setup terminal
135