10.7
Control element "RTC control element"
10.7.1
Name of the control element
Options:
Naming of the RTC control element.
The length of the name is limited to 36 characters.
10.7.2
Name of room (otional)
Options:
Naming a room in which the control element Split Unit Control is located.
The length of the name is limited to 36 characters.
10.7.3
Size of the button
Options:
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.7.4
Function icon
Options:
Specifies an icon for the function of the button.
10.7.5
Additional functions/objects
Options:
The parameter is used to specify whether parameter "Delay time during reading of telegrams
after reset [sec.]" is displayed.
10.7.6
Delay time during reading of telegrams after reset [sec.]
Options:
The parameter is used to specify the number of seconds telegrams are delayed after a reset.
Notice
The parameter can only be set when parameter "Additional functions/objects" is
set on "Yes".
Product manual 2CKA001473B5343
KNX control elements and application parameters
<Name>
<Name>
1x1
1x2
2x2
<Icon>
Deactivated
Activated
Setting option from 1 - 255 seconds
Control element "RTC control element"
│143