Yamaha DTX-MULTI 12 Firmware Update Manual

Hide thumbs Also See for DTX-MULTI 12:

Download this manual

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX-MULTI 12. First, check the

current version of the firmware, and then execute the update process.

Precautions (please be sure to read these)

・ The user assumes full responsibility for the update.

・ Please note that the DTX-MULTI 12 may be damaged if you fail to follow these instructions properly, or

turn off the DTX-MULTI 12 or disconnect the cable while the update is in progress.

・ Please save your important data onto the USB storage device before updating the firmware of the

DTX-MULTI 12.

・ If the update fails, and the DTX-MULTI 12 still does not operate correctly even after you execute the

update once again, please contact your Yamaha dealer.

・ This software and documentation are the exclusive copyrights of Yamaha Corporation.

・ Reproducing or modifying all or parts of this software or its documentation without permission is strictly

prohibited.

・ The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

DTX-MULTI 12 Firmware

Update Guide

Page 1 ・ The user assumes full responsibility for the update. ・ Please note that the DTX-MULTI 12 may be damaged if you fail to follow these instructions properly, or turn off the DTX-MULTI 12 or disconnect the cable while the update is in progress.
Page 2 Yamaha cannot guarantee operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner's Manual) for advice, or visit the following web page: http://dtxdrums.yamaha.com...
Page 3 DTX-MULTI 12. CAUTION DO NOT power off or remove the USB storage device from your DTX-MULTI 12 during the updating process. Your DTX-MULTI 12 may become inoperable. After downloading, decompress the archived file, and then find the "***.PGM" file.