Running the PV4062
To start PV4062, perform the following procedure:
1. Turn the system controller on and boot the HP-UX system.
2. Log in as a superuser.
3. Change the current directory to the /usr/pcs/diag directory as follows:
$ cd /usr/pcs/diag
4. Enter the HP BASIC/UX environment as follows:
$ rmb
5. Load and run the PV program as follows:
LOAD "PV4062"
RUN
4 Return 5
PV4062 main menu page is displayed as shown in Figure 6-4.
4 Return 5
or select the
Figure 6-4. PV4062 Menu Page (HP 4062UX)
softkey
NNNNNNNNNNN
RUN
System Verification 6-7