Advertisement
CAUTION
• Do not hang your clothes on the 3DW Diffusor. Otherwise, the horizontal louver and vertical louver will fall or be damaged,
resulting in injury.
• Do not place animals or plants in places where the air conditioner blows directly. Otherwise there will be adverse effects on
plants and animals.
• Do not use the burner in the place where the air conditioner blows directly. Otherwise, incomplete combustion of the
burner may lead to suffocation.
• Do not wash the air conditioner with water. Otherwise, it may lead to fire, electric shock and malfunction.
• Do not place combustible sprays etc. near the air conditioner or spray directly towards the air conditioner. Otherwise it will
cause fire.
• Disconnect the circuit breaker before cleaning the front panel and other parts. Place a sign of "in operation" near the circuit
breaker during the work. Otherwise it may result in injury or electric shock.
• Do not stand on an unstable surface during the maintenance work. Otherwise falling from the unstable surface will lead to
injury.
• Do not place other electrical products or property under the 3DW Diffusor. Otherwise, dirt, damage or malfunction may
result from dripping water.
• Do not run with doors and windows open for a long time under high humidity conditions (more than 80%). Otherwise, the
condensed water from the 3DW Diffusor will wet the furniture, etc. Moreover, internal parts may also fail due to
condensation.
2
Part Names
Panel
Horizontal louver (swing up and down)
3
Operation Method
Please refer to the manual of the remote controller for detailed operation method.
EN-3
4
To improve the cooling and heating effect, please set the wind direction for the horizontal louver appropriately according to
the cooling and heating operation modes.
Based on the characteristics of air, cold air accumulates at low places and warm air accumulates at high places.
• When running the cooling system, set the horizontal louver that controls the wind directions up and down to the mode of
horizontal air outlet, and set the vertical louver that controls the wind directions left and right to the mode of front air
outlet.
Cooling in other conditions may result in condensation water dripping from the air outlet and horizontal louver surfaces.
Reminder
• Heating with the mode of horizontal air outlet may increase room temperature imbalance.
• Do not directly rotate the horizontal louver and vertical louver by hand, otherwise it may cause equipment failure. Please
control the wind direction by the remote controller.
When running cooling mode
Operate the remote controller to set the
horizontal louver that controls wind direction
up and down to the mode of blowing
horizontally.
Vertical louver (swing left and right)
When running heating mode
Operate the remote controller to set the
horizontal louver that controls wind direction
up and down to the mode of blowing
downward.
– 2 –
Adjusting Wind Direction
CAUTION
Blowing horizontally
EN-4
Advertisement
