Functions - Siemens SIMATIC S7-1500 Manual

• Configurable diagnostics can be set for each channel
• Automatic backup of the device parameters during replacement of the IO-Link device
(only for V1.1 devices)
• Configuration limits:
– Max. 32 bytes input and output data per port
– Max. 240 bytes input and output data per module
The module supports the following functions:
• Firmware update
• Identification and maintenance data (I&M)
• IO-Link port configuration with S7-PCT
• IO-Link port configuration with STEP7 or GSD (without S7-PCT)
• Variable address range of I/O data with up to 240 byte inputs and 240 byte outputs
• Master backup with function block "LIOLink_Master"
• Port Qualifier Information (PQI)
• I&M 0 to 3
The module can be used with the following engineering tools:
Table 2-1 Engineering tools
Firmware version of the
module
V1.0 (in
CPU/PROFINET/PROFIBUS sta­
tion)
Accessories/spare parts
The following accessories/spare parts are available for the module and can also be ordered
separately:
• Labeling strips
• U connector
• Universal front cover
The following component must be ordered separately:
• Front connectors, including potential jumpers and cable ties
Additional information
You can find more information on accessories in the S7-1500/ET 200MP Distributed I/O Sys­
tem (https://support.industry.siemens.com/cs/ww/en/view/59191792) system manual in the
Accessories/Spare parts section.
2.2

Functions

IO-Link is a point-to-point connection between a master and a device. Both conventional and
intelligent sensors/actuators can be used as devices at the IO-Link via unshielded standard
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Equipment Manual, 08/2022, A5E45488510-AB
S7-PCT STEP 7 (TIA Portal)
As of V3.5 SP1
Product overview
As of V15.1
2.2 Functions
GSD file
X
13