Connection 1: Connecting With An Antenna - HP USB TV Tuner User Manual

2.

Connection 1: Connecting with an antenna

NOTE:
To install the TV tuner and connect it to the TV tuner antenna, follow these steps:
1.
2.
3.
NOTE:
connections on page
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Insert the TV tuner (2) into the other end of the USB extender cable.
The antenna cable length is not shown to scale.
Insert the TV tuner (1) into a USB port on the computer.
NOTE: Due to power and bandwidth requirements, do not insert the TV tuner into a USB hub.
Connect the TV tuner antenna cable (2) to the TV tuner.
Connect the remote sensor to a USB port on the computer. Refer to
sensor and infrared (IR) emitter cable on page
For additional connection steps, such as adding a television, refer to Chapter 4,
17.
Step 5: Connect the remote
12, for details.
Step 4: Set up your audio/video connection
Advanced
9