Panasonic BT-WMA26G Installation Instructions Manual page 5

■ Make sure the LCD monitor is installed in a way that does not block heat emission.
(If heat emission is blocked, this may cause fire.)
• For installation of the LCD monitor, be sure to leave enough space as indicated below.
Upper part: 10 cm (4 inches) or more. Side: 30 cm (11
cm (4 inches) or more
■ When removing the LCD monitor, also remove the wall mount adaptor.
(Being caught by the wall mount adaptor may cause injury.)
■ Make sure the electrical outlet is located so that the LCD monitor power plug is easily
assessable.
(When there is a malfunction, if the power plug of the LCD monitor is not disconnected, this
may cause fire or injury.)
■ Make sure two or more persons are used when installing or removing the LCD monitor.
(If the LCD monitor falls, this may cause injury.)
■ Before installation, always disconnect the power plug of the LCD monitor.
13 / inches) or more. Lower part: 10
16
5